ASTM E2371-2004 用原子辐射等离子体光谱测定法分析钛和钛合金的标准试验方法

作者:标准资料网 时间:2024-05-24 02:17:23   浏览:8481   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:StandardTestMethodforAnalysisofTitaniumandTitaniumAlloysbyAtomicEmissionPlasmaSpectrometry
【原文标准名称】:用原子辐射等离子体光谱测定法分析钛和钛合金的标准试验方法
【标准号】:ASTME2371-2004
【标准状态】:现行
【国别】:
【发布日期】:2004
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:E01.06
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:
【英文主题词】:atomicemissionspectrometry;DCP;directcurrentplasma;ICP;inductivelycoupledplasma;titanium;titaniumalloys
【摘要】:Thismethodforthechemicalanalysisoftitaniumandtitaniumalloysisprimarilyintendedtotestmaterialforcompliancewithspecificationsofchemicalcomposition.Itisassumedthatallwhousethismethodwillbetrainedanalystscapableofperformingcommonlaboratoryproceduresskillfullyandsafely,andthattheworkwillbeperformedinaproperlyequippedlaboratory.Themethodisdesignedtogivethemaximumflexibilityanalyzingelementsinthetitaniummatrix.ThusoptionsaregivenincalibrationandanalysistoaccommodatethevarietyofICPandDCPspectrometersandtheirauxiliarysystems.1.1ThismethoddescribestheanalysisoftitaniumandtitaniumalloysbyICP-AES(InductivelyCoupledPlasma)andDCP-AES(DirectCurrentPlasma)forthefollowingelements:ElementApplicationRange(wt.%)QuantitativeRange(wt.%)Aluminum0-80.001to8.0Boron0-0.040.0008to0.01Chromium0-50.005to4.0Copper0-0.60.002to0.5Iron0-30.004to3.0Manganese0-0.040.001to0.01Molybdenum0-80.004to6.0Nickel0-10.001to1.0Silicon0-0.50.02to0.4Tin0-40.02to3.0Vanadium0-150.01to15.0Yttrium0-0.040.001to0.004Zirconium0-50.003to4.0
下载地址: 点击此处下载
【英文标准名称】:Studs-Metalend1,25d
【原文标准名称】:双头螺栓.旋入端(约)1.25d
【标准号】:DIN939-1995
【标准状态】:现行
【国别】:德国
【发布日期】:1995-02
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:验收规范;平头螺钉;ISO螺纹;尺寸;铸件;螺柱;交货条件;旋入端;紧固件;公差(测量);铸铁;材料;螺钉;米制的;精整
【英文主题词】:finishes;insertedends;tolerances(measurement);cast-iron;grubscrews;deliveryconditions;fasteners;castings;materials;dimensions;acceptancespecification;studs(fasteners);screws(bolts);isoscrewth
【摘要】:
【中国标准分类号】:J13
【国际标准分类号】:21_060_10
【页数】:5P;A4
【正文语种】:德语


基本信息
标准名称:建筑物电气装置 第7部分:特殊装置或场所的要求 第707节:数据处理设备用电气装置的接地要求
英文名称:Electrical installations of buildings--Part 7:Requirements for special installations or locations--Section 707:Earthing requirements for the electrical installation of data processing equipmeng
中标分类: 建材 >> 建筑构配件与设备 >> 建筑电器与防灾器材设备
ICS分类: 建筑材料和建筑物 >> 建筑物中的设施 >> 供电系统
发布部门:国家质量技术监督局
发布日期:2000-12-11
实施日期:2001-10-01
首发日期:2000-12-11
作废日期:1900-01-01
主管部门:中国电器工业协会
提出单位:国家经贸委安全生产局
归口单位:全国建筑物电气装置标准化技术委员会
起草单位:机械科学研究院
出版社:中国标准出版社
出版日期:2001-10-01
页数:平装16开, 页数:8, 字数:12千字
适用范围

本标准的特定要求适用于数据处理设备在下述情况下与建筑物电源装置的连接:--数据处理设备经由符合IEC60083的或类似标准的插头和插座与建筑物电源装置相连接,它的对地泄漏电流超过GB4943(idtIEC6095:1991)规定的限值;--数据处理设备符合GB4943(idtIEC60950(代替435):1986)的要求(包括泄露电流)。本标准的要求适用于直到与数据处理设备连接那点为止的那部分电气装置,见图A1。本标准也可用于数据处理设备以外的设备,例如工业控制设备和通信设备的电气装置。安装那些设备由于要求抑制射频干扰的滤波设备,而具有大的泄漏电流。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 建材 建筑构配件与设备 建筑电器与防灾器材设备 建筑材料和建筑物 建筑物中的设施 供电系统